Association of bound states of the coulomb potential with resonances of the coulomb potential perturbed by a barrier

In the present article we show how the bound states of the Coulomb potential may be associated with resonances that occur when this potential is perturbed by a barrier potential. The main idea is to trace the bound states on successive switching on of the barrier perturbation. It is found that those bound states that are localized inside the barrier are highly sensitive to variation with respect to the barrier height, whereas those that are localized outside are less sensitive. However, there are certain intervals for the barrier height when the role of being “a state localized inside the barrier” is shifted from one bound state to another. The result can be pictured as a “relay race,” where the “deliveries of the baton” are carried out over corresponding avoided crossings. The baton is ultimately handed over to a shape-type resonance state.     

Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

Secondary metabolites isolated from Colletotrichum species

Structural and biosynthetic studies of the metabolites isolated from various Colletotrichum species are reviewed. These fungi are destructive post-harvest pathogens on a wide range of plants including cereals, legumes and fruits. The review includes a detailed study of the biological activity of these metabolites and their role in the development of plant diseases. The literature in this field to the present is reviewed and 60 references are cited.     

A novel strategy towards the asymmetric synthesis of orthogonally funtionalised 2-N-benzyl-N-alpha-methylbenzylamino- 5-carboxymethyl-cyclopentane-1-carboxylic acid

The asymmetric synthesis of the orthogonally funtionalised compounds tert-butyl 2-N-benzyl-N-alpha-methylbenzylamino-5-methoxycarbonylmethylcyclopentane- 1-carboxylate and methyl 2-N-benzyl-N-alpha-methylbenzylamino-5-carboxymethylcyclo- pentane-1-carboxylate by a domino reaction of tert-butyl methyl (E,E)-octa-2,6- diendioate with lithium N-alpha-methylbenzyl-N-benzylamide initiated by a Michael addition, subsequent 5-exo-trig intramolecular cyclisation and posterior selective hydrolysis with trifluoroacetic acid is reported.     

Ethylenediamine effect on Co2+ uptake by zeolite Y

Co²⁺ ion exchange, at room temperature, from aqueous cobalt — sodium chloride solutions with NaY zeolite has been studied. The effect of contact time on the shape of the sorption curves of Co²⁺ using zeolite Y dehydrated at 600°C is similar to the one found in our previous work with a zeolite dehydrated at 150 °C. A fast sorption uptake is observed in which 1.8 meq of Na⁺ ions/g of zeolite are replaced by cobalt ions followed by a desorption process where the uptake decreases to 1.2 meq/g zeolite. The Co²⁺ sorption using zeolite Y dehydrated at 600 °C is increased when ethylenediamine solution is passed through the zeolite. The Co²⁺ sorption uptake, initially 2.0 meq/g, incrases to 2.8 meq/g of zeolite. This behavior is explained by the location and coordination of cobalt in zeolite Y sites. It is suggested that the highest uptake process is due to the blocking of zeolite sites by a Co complex compound.     

A new approach to qualitative analysis of organophosphorus pesticide residues in cucumber using a double gas chromatographic system: GC-pulsed-flame photometry and retention time locking GC-mass spectrometry

A qualitative method for the screening of organophosphorus pesticides (OPs) that could present in different types of vegetables has been established and validated. A typical multi-residue extraction procedure of OPs using ethyl acetate and sodium sulphate has been applied. No clean-up was required after extraction, and concentrated extracts were analysed by gas chromatography with pulsed-flame photometric detection (GC-PFPD). Confirmation of compound identities was performed by gas chromatography with mass spectrometric detection (GC-MSD) in the electron impact (EI) mode with full scan acquisition. Retention time locking (RTL) software was used in order to improve the method capability of identification and confirmation. Spiked samples at pesticide concentrations equal to the maximum residue level (MRL) were used to check chromatographic performance and for validation studies. The proposed method allows a rapid and accurate identification of the studied OPs until the ng ml(-1) range for those whose use is forbidden, and above their MRL concentration for the rest.     

Use of micellar mobile phases for the chromatographic determination of clorazepate, diazepam, and diltiazem in pharmaceuticals

An ODS-2 column, a micellar mobile phase of high elution strength containing 0.1M sodium dodecyl sulfate and 3% (v/v) butanol, and ultraviolet detection at 230 nm are used for the determination of either of two benzodiazepines (clorazepate and diazepam) and a benzothiazepine (diltiazem) in pharmaceuticals. The procedure is shown to be competitive against conventional chromatography with methanol-water mobile phases, especially for diltiazem. The composition of the micellar mobile phase is selected using a predictive strategy based on an accurate retention model and assisted by computer simulation. Calibration graphs are linear at least in the 2.5 to 20 microg/mL, 4 to 20 microg/mL, and 5 to 40 microg/mL ranges for clorazepate, diazepam, and diltiazem, respectively. The intra- and interday repeatabilities (%) are clorazepate (1.7, 5.2), diazepam (0.43, 3.7), and diltiazem (0.36, 3.1). Limits of detection are well below the concentrations of the drugs found in the commercial pharmaceutical preparations analyzed. The drug contents evaluated with the proposed procedure are compared with the declared contents given by the manufacturers. The achieved percentages of label claim are usually between 95 and 104%.     

Simple and rapid determination of the drug naproxen in pharmaceutical preparations by heavy atom-induced room temperature phosphorescence

A simple, selective and sensitive heavy atom-induced room temperature phosphorimetric method (HAI-RTP) is described for the determination of naproxen (NAP) in pharmaceutical preparations. The phosphorescence signals are a consequence of intermolecular protection when analytes are, exclusively, in presence of a heavy atom salt and sodium sulfite as an oxygen scavenger to minimize RTP quenching. These variables selection constitute the basis of a HAI-RTP method for the determination of naproxen (detection limit 17.6 ng ml(-1); 1.71% relative standard deviation at 250 ng ml(-1)). The method has been applied satisfactorily to the analysis of pharmaceutical preparations.     

A pyrimidine thiolate Rh(I) complex: structure, bonding and one-dimensional interactions in solid and in solution

The reaction of [Rh(micro-Cl)(COD)]2 with 4,6-dimethyl-pyrimidinethiolate (Me2-pymt) and subsequent substitution of COD by CO yields [Rh(Me2-pymt)(CO)2]. The stacking pattern found in this compound is in contradiction with previously studied comparable square-planar complexes of type d8-[M(chelate)(monodentate)2] in which each ligand has different pi-acidic character. A theoretical study of the intermolecular interactions and conformation of the title compound has been carried out, combining semi-empirical band calculations on the real chains and ab initio(MP2 level) calculations on a model dimer. The combination of electronic and steric effects determines the rotation of the successive monomers and the deviation from linearity of the one-dimensional stacks. Its behaviour in solution is also special, developing a blue colour and forming micelles, when adding water to acetone solutions.     

Representation of the molecular topology of cyclical structures by means of cycle graphs. 3. Hierarchical model of screening of chemical databases

The increase in the size and complexity of chemical databases necessitates the proposal and development of efficient methods of classification and recovery of information, which supposes proposal of a model of classification of database records and the use of a compatible model of screening for inspection of clusters and recovery of the molecules that satisfy the search criterion. The cycle graphs model based on consideration of all the cycles and chains (and equivalent cycles and chains) present in the molecular structure has been proven appropriate for classification of chemical databases, giving rise to a generation of different classification levels depending on the structural elements (cycles and chains) that are considered. In this paper we propose a screening model, compatible with the cycle graphs model, based on a hierarchy of levels of abstraction. The set of molecules that satisfies a screening model (or selection criterion) diminishes as we advance in the hierarchy of levels of the model, which allows filtering of records and, therefore, an increase in the efficiency of the screening process. In the following work of this series we describe and validate the screening tool developed.